Auto/Car Fender Roller-Lip Reforming Rolling Tool:
Fits most 4 or 5 lug wheel hubs car and light truck.
Simple and easy to use.
For repair & reshaping of wheel arches.
Arm adjustable from 14″ to 22 3/4″.
Attached hitch pin allows for wide or narrow angle operation.
How it Works, The Rolling Process:
The vehicle is jacked up and wheel or wheels removed.
The guard lip is cleared of dirt, gravel etc.
The guard is heated with a heat gun to allow the paint to flex while being rolled.
The guard lip is rolled in several stages, a little at a time and heated during each stage.
Once completed the inner lip of the guard will be an almost vertical shape or as close to 90 degrees as possible from the original horizontal lip.
A successful roll is dependant on a number of factors, can vary from vehicle to vehicle and may change if the vehicle:
Have uneven or very large spot welds around guard lip.
Have any weak spots in the guard.
Is an older vehicle.
Has holes, grooves, seams or joins or variations in the structure of the guard lip.
Has any rust, body filler etc. under the paint.
Has been modified or has had earlier smash repairs.